Planet Networking & Communication VGW 20FS Series User Manual page 2

4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
Copyright
Copyright (C) 2020 PLANET Technology Corp. All rights reserved.
The products and programs described in this User's Manual are licensed products of PLANET Technology. This
User's Manual contains proprietary information protected by copyright, and this User's Manual and all
accompanying hardware, software, and documentation are copyrighted.
No part of this User's Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form by any means by electronic or mechanical including photocopying, recording,
or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without
the prior written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and does not represent a commitment on the
part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's
Manual. PLANET makes no commitment to update or keep current the information in this User's Manual, and
reserves the right to make improvements to this User's Manual and/or to the products described in this User's
Manual, at any time without notice.
If User finds information in this manual that is incorrect, misleading, or incomplete, we would appreciate User
comments and suggestions.
CE Mark Warning
This is a class B device. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy saving, please remove the
DC-plug or push the hardware Power Switch to OFF position to disconnect the device from the power circuit.
Without removing the DC-plug or switching off the device, the device will still consume power from the power circuit.
In view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to switch
off or remove the DC-plug from the device if this device is not intended to be active.
I