Click "Start' to enable syslog capture
Dialing out through gateway, start talking a short while and then hanging up the call.
Click 'Stop' to disable syslog capture
Save the capture to local computer
The capture is named as 'capture(x).pcap'; x is serial number of capture and will be added 1 next time. The
sample of syslog capture is shown below:
Getting started to RTP capture
PCM capture helps to analyze voice stream between gateway and remote IPPBX/SIP Server.
To enable RTP capture:
Select RTP special on Network Capture page
Click Start to enable RTP capture
Dial out through gateway, start talking for a short time and then hang up the call.
Click Stop to disable RTP capture
Save the capture to local computer
The capture is named as 'capture(x).pcap'; x is serial number of capture and will be added 1 next time. The
sample of RTP capture is shown below:
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
74