Planet Networking & Communication VGW 20FS Series User Manual page 49

Voicemail instructions:
How the voicemail works in the VGW-X20FS SERIES gateway together with Elastix.
1）After the gateway is registered to Elastix server, enable the voicemail function in Elastix for the
corresponding extension number and then set password shown below：
2） Check feature code in Elastix and change it if necessary. Its default feature code setting is as follows:
On the Web interface of VGW-X20FS SERIES, click Advanced  SIP Parameter in the navigation tree
and then enter voicemail User ID.
Elastix Voicemail Configuration Interface
Elastix Voicemail Setting
VoiceMail Setting in SIP Parameter
41
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway