Route Any Calls From Any Port To Specific Sip Ip Trunk - Planet Networking & Communication VGW 20FS Series User Manual

4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway

Route any calls from any port to specific SIP IP trunk

3.11.3
Create IP Trunk on the Call & Routing  IP Trunk interface:
After IP Trunk is created, check the following configuration:
As shown above, the IP trunk is created, and the remote end IP address is 172.16.125.125, the SIP port
is 5060.
Create Tel -> IP routing rule
On the Call & Routing Tel-IP Routing interface, click "Add" to create a new Tel  IP routing rule.
59