Appendix; Additional Locks - B&D Roll-A-Door 2 Series Installation Instructions Manual

Roll-A-Door Series 2 installation instructions
®

3.0 appendix

3.1 additional locks

optional padbolt type locking
Assemble locking bar as shown in Fig 3.1.1 ensuring
head stop is fitted.
wave washer
flat washer
outside locking bar
bottom rail
inside locking bar
Fig: 3.1.1
internal waist high slide bolt
(left hand side shown – viewed from inside)
With door fully closed check that bolt slides through
guide. Adjust hole if necessary.
Fig: 3.1.2
head stop
WARNING! Head-stop
secured to slide bolt as shown
before door is operated. Failure to
do so will result in unrolling of door
causing damage.
15
must be