Handling Of The Hose Coupling - WAGNER PEA-T3XL Series Operating Manual

Crossed finger nozzles
Note that the installation dimensions Z (as described on page 2) changes when using finger
nozzles. The finger nozzle has a length of: Z1 = 315 mm.
The following result applies e.g. to the PEA-T3XL 1.4: Z = 1475 - 46 + Z1 = 1429 + 315 =
1744 mm
Article numbers and other information on nozzle systems are to found in chapter
nozzles".
2.2

Handling of the hose coupling

Loosen the hose coupling:
1. Lift the O-ring 1 out of the groove and slide it towards spray gun.
2. Turning the locking nut 2 in a clockwise direction up to the stop and pull the hose coupling 3
out of the coupling piece 4.
Connecting the hose coupling:
3. Insert the hose coupling 3 into the coupling piece 4 and turning the locking nut 2
counterclockwise up to the stop.
4. Press the O-ring 1 into the groove again (securing function).
Hint
Slide the powder hose as much as possible up to the stop onto the hose coupling!
10
Complicated profiles
•
for uniform coating thickness
1
4
1
2
0351701
Directed spray with:
the standard nozzle 1
or
powder shower 3
For powder quantities from:
100 ... 200 g/min
3
P_00748
- PEA-T3XL
Preparing the spray gun
3
9.3.5 "Finger
05 / 2009