Disassembling The Device - Honeywell HON 512 User And Maintenance Manual

9.2

Disassembling the device

Heavy transport units
Suspended loads
Requirements
HON 512 with HON 650 pilot user manual
Risk of serious injury posed by heavy loads when using cranes for transportation
Transporting heavy devices or components with a crane may result in serious impact and
crush injuries if the loads start moving in an uncontrolled manner.
 Loads may only be transported with a crane by a duly qualified person.
 Markings and information about the center of gravity of the load (if applicable) must be
observed.
 Loads may only be moved under supervision.
Risk of serious injury in the event that load handling attachments break while holding a
suspended load
Heavy loads picked up or transported with hoisting and slinging gear may result in serious
impact and crush injuries if the load handling attachments fail.
 Only fasten the device at the positions intended for the transport.
 The load-bearing capacity of the appropriate hoisting equipment must correspond at
least to the weight of the load to be transported.
 Always stand clear of suspended loads.
 Ensure that no person is within the danger zone.
Make sure that the following requirements are met:
▪ The inlet and outlet shut-off devices for the gas regulating line section are closed.
▪ The system is depressurized between the inlet shut-off device and the outlet shut-off
device.
▪ All the gas pressure regulator's lines have been purged with nitrogen.
▪ The gas pressure regulator's electrical connections (electrical displacement transducer,
optional) are de-energized and locked and tagged out.
Decommissioning, storage, renewed start-up, disposal
147