Maintaining The Actuator Assembly - Design - Honeywell HON 512 User And Maintenance Manual

8.4.4 Maintaining the control stage with a metal bellows assembly
8.4.5 Maintaining the load limiting stage
8.4.6 Maintaining the fine mesh filter
8.4.7 Reassembling the pilot
8.5 Completing the maintenance
9 Decommissioning, storage, renewed start-up, disposal
9.1 Preparing for disassembly
9.2 Disassembling the device
9.3 Storing the gas pressure regulator
9.4 Putting the gas pressure regulator back into operation
9.5 Disposing of the gas pressure regulator
10 Appendix
10.1 Additional information regarding spare parts
10.2 Spare parts for HON 512 actuator assembly, design 1, DN 25 - DN 100
10.3 Spare parts for HON 512 actuator assembly, design 2, DN 150 - DN 250
10.4 Spare parts for HON 512 actuator assembly, design 3, DN 25 - DN 250
10.5 Spare parts for two-stage HON 650 pilot
10.6 Spare parts for single-stage HON 650-1 pilot
10.7 Lubricants, threadlockers, and tools
10.8 Technical specifications for HON 970a electrical displacement transducer
HON 512 with HON 650 pilot user manual
Contents
125
134
137
139
141
144
145
147
149
150
151
152
153
155
162
170
183
198
202
204
3