10.7 Lubricants, Threadlockers, And Tools - Honeywell HON 512 User And Maintenance Manual

10.7 Lubricants, threadlockers, and tools

Lubricants
Threadlocker
HON 512 with HON 650 pilot user manual
Important! All parts must be slightly greased.
Use the following lubricants:
Application
O-rings
Stationary and moving
Flat gaskets
Diaphragms
Valve rod sliding surfaces
Sliding guides
Guide bushings
Moving parts in SAV controlgear
and switchgear
Switch jacks and locking sleeves
Control balls and control rollers
Ball bearing
Valve sleeves and valve sleeve
gaskets in gas pressure regulators
Setpoint set screws
Power screws
Thread material combination:
Al/Al
Screw-in fittings and fastening
screws
Spring plate depressions (pilot)
Devices for oxygen
Important! Oil-free and
grease-free installation; only
antiseize agents are permissible
Devices for ammonia
Important! All parts must be coated slightly.
Use the following threadlockers:
Application
For the HON 650 pilot
▪ Cap threads
▪ Hex nut threads
▪ Connecting piece threads
Remark Lubricant
Standard model:
Silicone grease (jar)
Grease the dia- Silicone grease (tube)
phragm grip body on
all sides
Do NOT grease the
flat grip
Low-temperature model:
Silicone grease (jar)
Grease film only
High-temperature model:
PFPE grease
Silicone grease
Assembly paste
Upper oxygen
pressure limit: Antiseize agent
260 bar at 60 °C
Antiseize agent
Threadlocker
LOCTITE
Appendix
Part no.
27079
27081
27993
102389
27052
27091
28211
28211
Part no.
26 688
202