Important:
If you change the breathing circuit after
completion of the Pre-use check, perform
a new Pre-use check or a patient circuit
test.
When the Pre-use check is completed,
all possible sources of alarm signals have
been verified and the alarm system
operates correctly.
SERVO-s VENTILATOR SYSTEM V7.0, User's Manual
4.2.1 START-UP
1. Connect power and gas supplies:
Power: AC outlet
Gas: Air and O
CAUTION: Ensure that the cable to the User
Interface is never disconnected while the
SERVO-s Ventilator System is powered on.
2. Turn the ventilator on.
|
Operation overview
2
| 4 |
43
Need help?
Do you have a question about the Maquet SERVO-s VENTILATOR SYSTEM V7.0 and is the answer not in the manual?