Edit The Start-Up Configuration - GETINGE GROUP Maquet SERVO-s VENTILATOR SYSTEM V7.0 User Manual

10.3 EDIT THE START-UP
CONFIGURATION
To edit the Start-up Configuration.
1. Press the Edit configuration touchpad in
the Biomed submenu.
2. Press the Start-up configuration touchpad.
3. Press the touchpad for desired start-up
setting.
4. Press Next to continue to ventilation mode
settings.
5. Press the appropriate touchpad to change
the settings.
Note: Press Restore mode settings to
restore factory default settings.
6. Press Next to view a summary of the
start-up configuration.
7. Press Accept to save the start-up settings.
Note: The ventilator must be restarted to
activate the new settings.
SERVO-s VENTILATOR SYSTEM V7.0, User's Manual
10.3.1 PROCEDURE DIAGRAM: EDIT THE
START-UP CONFIGURATION
SVS-9045_XX
| Start-up configuration
141
| 10 |