Table of Contents
Advertisement
CHAPTER 4: QUICKFLY RIGGING
IMPORTANT SAFETY CONSIDERATIONS!
When installing Meyer Sound loudspeakers and subwoofers,
the following precautions should always be observed:
All Meyer Sound products must be used in accordance
•
with local, state, federal, and industry regulations. It is the
owner's and user's responsibility to evaluate the reliability
of any rigging method for their application. Rigging should
only be carried out by experienced professionals.
Use mounting and rigging hardware that has been rated to
•
meet or exceed the weight being hung.
RIGGING OPTIONS
Table 4 summarizes the available rigging options for LINA.
For complete information on rigging hardware, including
dimensions, weight, configuration, and load ratings, refer to
the MG-MINA/LINA/750 Assembly Guide (PN 05.207.101.02)
available at www.meyersound.com.
Table 4: LINA Rigging Options
Model
MG-MINA/LINA/750-LFC
multipurpose grid kit
(PN 40.207.101.01)
MG-MINA/LINA/750-LFC
multipurpose grid kit with
GLK
(PN 40.207.101.02)
MYA-MINA/LINA Yoke kit
(PN 40.207.104.01)
MUB-MINA/LINA
U-Bracket kit
(PN 40.207.030.01)
PBF-LINA
pull-back frame kit
(PN 40.271.080.01)
Weight
Features
39 lb
With some restrictions, flies up to 16 LINA cabinets at a
(17.7 kg)
5:1 safety factor and BGV C1 with some angle restrictions
(additional load ratings are possible—use MAPP to verify
load ratings); supports mixed arrays of LINAs and
750-LFCs without transition hardware; accommodates a
variety of pickup configurations with four corner and 11
center pickup points; can also be used for
groundstacking.
39 lb
With some restrictions, flies up to 16 LINA cabinets at a
(17.7 kg)
5:1 safety factor and BGV C1 with some angle restrictions
(additional load ratings are possible—use MAPP to verify
load ratings); supports mixed arrays of LINAs and
750-LFCs without transition hardware; accommodates a
variety of pickup configurations with four corner and 11
center pickup points; can also be used for
groundstacking; includes MG-MINA to 750-LFC Grid
Link.
12.9 lb
Suspends arrays of up to three LINA cabinets from a
(5.85 kg)
single point and pole-mounts up to two cabinets on top
of a 750-LFC (pole-mount adapter not included). The
yoke includes two bracketing options: the MPA-2 for
attaching to two cabinets, and the MPA-3 for attaching
to one or three cabinets.
5.8 lb
Mounts up to five LINA cabinets for front-fill or under-
(2.63 kg)
balcony coverage with up to 20 degrees of tilt. Pole-
mounts up to two cabinets (pole-mount adapter not
included).
4 lb
Attaches to bottom of LINA arrays (to the bottom cabi-
(1.8 kg)
net) and provides pull-back for extreme array downtilt.
Make sure to attach mounting hardware to the building's
•
structural components (roof truss), and not just to the wall
surface.
Make sure bolts and eyebolts are tightened securely.
•
Meyer Sound recommends using Loctite
fasteners.
Inspect mounting and rigging hardware regularly. Immedi-
•
ately replace any worn or damaged components.
0.25 in x 0.90 in (black button),
PN 134.036, qty 8 included
0.25 in x 0.90 in (black button),
PN 134.036, qty 8 included
0.25 in x 0.90 in (black button),
PN 134.036, qty 2 included
®
on all threaded
Required Quick-
Required
Release Pins
Shackles
5/8-inch or
5/8-inch or
—
—
3/4-inch
3/4-inch
—
—
1/2-inch
23
Hide quick links:
Advertisement
Table of Contents
