Electrical Safety Guidelines - Meyer Sound LINA Operating Instructions Manual

ELECTRICAL SAFETY GUIDELINES

Make sure to observe the following important electrical and
safety guidelines.
The powerCON 20 connector should not be engaged or
•
disengaged when under load or energized. Either
de-energize or disconnect the other end of the cable.
LINA requires a grounded outlet. Always use a grounded
•
outlet and plug.
Chassis ground
Do not use a ground-lifting adapter or cut the AC cable
•
ground pin.
Do not exceed the current capability of the 20 A AC Input
•
connector for the loudspeaker. When looping loudspeak-
ers, consider the total current draw for all loudspeakers on
the circuit, including the first loudspeaker.
Make sure the AC power cable for the loudspeaker has the
•
appropriate power plug (on the other end) for the area in
which you will operate the loudspeaker. In addition, the AC
power cable must be rated for the total current draw of all
loudspeakers looped from the power source.
Do not operate the unit if the power cable is frayed or bro-
•
ken.
Keep all liquids away from LINA loudspeakers to avoid
•
hazards from electrical shock.
Earth ground
LINA OPERATING INSTRUCTIONS
17