Lina Guidealinks - Meyer Sound LINA Operating Instructions Manual

CHAPTER 4: QUICKFLY RIGGING
Table 4: LINA Rigging Options
MVP motor Vee plate kit
(PN 40.215.184.01)
MCF-MINA/LINA
caster frame kit
(PN 40.207.102.01)

LINA GUIDEALINKS

Each LINA loudspeaker is equipped with four captive
GuideALinks that link to adjacent units in flown and
groundstacked arrays. Located at the bottom corners of the
end frames, the GuideALinks extend and retract with knobs
and are secured with quick-release pins (Figure 17).
Figure 17: LINA GuideALinks with Quick-Release Pins
When linking LINAs, two quick-release pins are
required for each GuideALink: one to secure the
position of the link in the top unit, and one to secure the link
to the linked bottom unit. Eight (0.25 in x 0.53 in) quick-
release pins are included with each LINA.
24
20 lb Fine tunes the horizontal aim of arrays; compatible with
(9.1 kg) MTG-LEO-M, MTG-LYON, MTG-1100, and
MG-LINA/750 grids.
28 lb Safely transports up to five LINA cabinets, making it
(12.7 kg) easy to assemble and disassemble arrays in blocks of
five cabinets.
0.25 in x 0.90 in (black button),
CAUTION: Make sure to secure the LINA
!
GuideALinks with the included quick-release
pins. GuideALink knobs are for extending and
retracting the links and should not be used to support
the weight of the loudspeaker (without using the pins)
when fully extended.
Front GuideAlinks
The front GuideALinks (Figure 18) act as a pivot point
between linked LINAs, with the splay angle between the
units determined by the rear GuideALink positions. When
stowing front GuideALinks, the knob is positioned at the top
of the slot.
Figure 18: Front GuideALinks
—
PN 134.036, qty 4 included
3/4-inch or
7/8-inch
—