Mcf-Mina/Lina Caster Frame - Meyer Sound LINA Operating Instructions Manual

MCF-MINA/LINA CASTER FRAME

The MCF-MINA/LINA caster frame (Figure 39) safely supports
up to five LINAs (Figure 40) for transport and groundstacking,
making it easy to assemble or disassemble arrays. The caster
frame's sturdy construction allows it be conveniently moved
with forklifts.
NOTE: For complete information on the
MCF-MINA/LINA, as well as for other rigging
accessories, refer to the MG-MINA/LINA/750-LFC
Assembly Guide (PN 05.207.101.02) available at
www.meyersound.com.
Figure 39: MCF-MINA/LINA Caster Frame
The LINA at the bottom of the stack attaches securely to the
caster frame with its GuideALinks and is secured with the four
(1/4 by 0.90-inch) quick-release pins included with the caster
frame. The configuration of the GuideALinks for the attached
LINA determines its tilt, which can be from +6° (uptilt) to –5°
(downtilt).
CAUTION: Always use the quick-release pins
!
included with the MCF-MINA/LINA caster frame
to secure groundstacked LINAs to the grid. Do not use
the quick-release pins included with LINA in the frame
as they are shorter and will not lock in place.
Figure 40: MCF-MINA/LINA Caster Frame with LINA Stack
TIP: The MG-MINA/LINA/750-LFC grid can travel
installed on top of LINA stacks.
TIP: Durable nylon covers, sized for stacks of 3, 4,
and 5 units, are available to ensure the LINA is
completely road ready.
LINA OPERATING INSTRUCTIONS
33