Web Interface - TagMaster XT-1 Installation Manual

Hide thumbs Also See for XT-1:
Table of Contents

Advertisement

XT-1 Installation Manual
13-111 02, 2014-RO-012, 2014-04-30

Web Interface

XT-1 has a web interface for configuration and maintenance. The web interface is designed and tested to
work with Google Chrome 34, Microsoft Internet Explorer 10, and Mozilla Firefox 28.
Before it is possible to connect to the web interface, the PC's IP address and subnet mask must be
changed. In Windows 7, this is done using "Network and Sharing Center" in "Control Panel". Click on "Local
Area Connection", "Properties", "TCP/IPv4", and "Properties". Select "Use the following IP address" and fill
in "IP address" 10.0.0.10 and "Subnet mask" 255.0.0.0 as shown in Figure 25. Click "OK".
Figure 25 Changing IP address in Windows
Connect to the reader by entering the reader's IP address in the web browser's address bar. The reader's
IP address can be found on a label on the backside of the reader. Figure 26 shows the web interface with
all menu alternatives expanded. Note that the web interface may look slightly different depending on the
version of the firmware in the reader. Up-to-date documentation is always available by selecting
"Documentation" in the web interface menu.
Figure 26 Web interface with expanded menu
Page 23 of 32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents