Table of Contents
Advertisement
XT-1 Installation Manual
1 Introduction
Overview
The XT-1 is an UHF RFID reader compliant with EPC Gen 2 (ISO 18000-6C). The reader is specifically
tailored for Automatic Vehicle Identification (AVI) applications such as Parking, Gated Communities and
Condominiums. It has been designed to provide absolutely premium performance for read-range and
environmental specifications while also giving a large number of interface options and having an innovative
implementation for TCP/IP connectivity and monitoring.
Tags
XT-1 supports any UHF tag compliant with the EPC Gen 2 standard. XT-1 also supports the SecureMarkID
format developed by TagMaster to ensure that each tag has a truly unique identity that is difficult to duplicate.
Security and SecureMarkID
The EPC Gen 2 standard was initially developed for low cost item management and has for that reason no
built-in support for encryption like DES or AES. This differentiates the system from for instance many
proximity identification systems. To address this, TagMaster has developed the SecureMarkID
an encryption algorithm and non-writeable parts of the tag to create a truly unique identity that is difficult to
duplicate. It is recommend to use SecureMarkID
limitations in any application requiring high security.
As the development of a cryptographic framework for EPC Gen2 proceeds, TagMaster will offer future new
products to continue to make the most of available technology in an effort to offer the highest possible
security.
2 Installation
Safety Instructions
The following safety instruction should be observed during installation, normal use and service.
The installation and service should only be done by qualified personnel.
Shields of cables should be connected to safety ground.
The XT-1 must be disconnected from all voltage sources before any installation or service work.
Capacitors inside the XT-1 can hold their charge even if the equipment has been disconnected from
all voltage sources.
Do not modify any part of the product. Repair is to be performed by TagMaster only.
Where local regulations exist, these are to be followed. The safety information in this manual is a
supplement to local regulations. It is the responsibility of the local project manager to make certain
that local regulations are known and followed.
13-111 02, 2014-RO-012, 2014-04-30
®
®
tags only together with XT-1, but also to consider these
®
®
format using
Page 4 of 32
Hide quick links:
Advertisement
Table of Contents
