XT-1 Installation Manual
Relay
The XT-1 has a non-latching relay available. It is typically connected to the logic controlling a barrier, gate
or other object when the reader is in stand-alone operation.
Figure 19 Relay connections, overview and detail
Connections
Switching current
Switch voltage
Switching capacity:
Recommended / Max length
Wire size
Table 10 Output connection overview
Figure 20 Inactive relay (COM connected to NC)
COM Common (See Figure 19 for details)
NO
Normally Open
NC
Normally Closed
Max 2 A
Max. 60 VDC / 30 VAC
Max. 60 W / 62,5 VA
10 m / 100 m
2
0.5 mm
(AWG 20)
13-111 02, 2014-RO-012, 2014-04-30
Page 18 of 32