X-LINE ADVANCE install system rigging
3.3
Attaching the bottom element and bottom grid kit
Notice!
If PREVIEW determines that a bottom grid kit is necessary, follow Attaching the bottom
element without a bottom grid kit, page 17 .
If PREVIEW determines that a bottom grid kit is not necessary, follow Attaching the bottom
element with a bottom grid kit, page 19 .
3.3.1
Attaching the bottom element without a bottom grid kit
Bosch Security Systems B.V.
1.
Repeat steps 1 through 4 in Attaching elements
under the top element, page 13 .
2.
Apply threadlocker, and insert three M10 bolts
through the rear plate, the rear link bar, the large
round spacer, and into the bottom rear holes in the
bottom element.
3.
Tighten by finger for now.
4.
Repeat steps 1 through 3 on the other side of the
bottom element.
Rigging manual
Installation | en
17
2020-06 | V03 | F01U361023