X-LINE ADVANCE install system rigging
Bosch Security Systems B.V.
8.
Align the next element in the array with the previous
element. The front link bars should be aligned with
the top front holes in the next element.
9.
Apply threadlocker and insert the M10 bolt through
the top hole of the front plate, through the link bar
of the previous element and into the top front
suspension point of the next element.
10. Apply threadlocker and insert the M10 bolt through
the bottom hole of the front plate, through the front
link bar, and into the bottom suspension point of the
next element.
11. Tighten by finger for now.
Rigging manual
Installation | en
15
2020-06 | V03 | F01U361023