Active Power Meter; Measurement Principle - Keba KeContact KC-P30 Translation Of The Original Instructions

KC-P30 Charging Station
2.9

Active power meter

Information
The required energy for setting the charging station by the manufacturer
and for the commissioning process are part of the total energy. For this rea-
son, the meter reading will not have the value "0" after the installation has
been completed.
Information
The maximum meter reading is 99 999, after reaching this value the meter
starts from "0" again.
Counting register overflow is limited by the limitation of displayable points on
the display. Within a measurement data record (start counter status – end
counter status), there is no overflow. Resetting to "0" happens when starting
the next charging session.
2.9.1

Measurement principle

The measurement of the transmitted energy takes place by means of pas-
sive transducers on all phases to be contacted.
V1.03
© KEBA
1 ... Pulse LED
Description of the device
14