Keba KeContact P30 X Series Software Update Instructions
Charging wallbox
Hide thumbs
Also See for KeContact P30 X Series:
- Configuration manual (68 pages) ,
- Translation of the original instructions (28 pages) ,
- Installation and configuration manual (23 pages)
Related Manuals for Keba KeContact P30 X Series
Summary of Contents for Keba KeContact P30 X Series
- Page 1 KeContact x-series Software Update Instructions V 1.14 Translation of the original instructions...
- Page 2 Specifications are subject to change due to further technical developments. Details presented may be subject to correction. All rights reserved. Reindlstraße 51, 4040 Linz, Austria, www.keba.com/emobility KEBA Energy Automation GmbH +43 732 7090-0, +43 732 7309-10, kecontact@keba.com For information about KEBA and our subsidiaries please look at www.keba.com.
-
Page 3: Table Of Contents
Notes on this document ................... Further documentation..................About the update ......................Determine software version ................Update via web interface ................... Update via OCPP ......................Update via USB......................Remove covers ....................Perform update ....................Mount covers ....................Software Update Instructions V1.14 © KEBA... -
Page 4: Introduction
Purpose of the document This document describes how to perform a software update at P30 x-series. The software update can be installed on the charging station via the web in- terface, the OCPP backend or via USB. Software Update Instructions V1.14 © KEBA... -
Page 5: Requirements
Warranty Only general maintenance work that is expressly permitted by KEBA may be performed. Any other tampering to the device will result in a loss of the war- ranty claim. -
Page 6: Further Documentation
Introduction ● Operating behavior of the charging station ● Operation of the charging station ● Configuration of the charging station Further documentation Manuals and additional information are available on our website: www.keba.com/emobility-downloads Software Update Instructions V1.14 © KEBA... -
Page 7: About The Update
Before updating, check which software version is on the charging station. The current software version can be seen in the web interface of the charg- ing station. The description for accessing the web interface can be found in the "Configuration Manual". Software Update Instructions V1.14 © KEBA... -
Page 8: Update Via Web Interface
During the software update, the power supply must not be interrupted under any circumstances and the charging station must not be restarted. Other- wise the software update will not be completed correctly and normal opera- tion of the charging station is no longer guaranteed. Software Update Instructions V1.14 © KEBA... -
Page 9: Update Via Ocpp
During the software update, the power supply must not be interrupted under any circumstances and the charging station must not be restarted. Other- wise the software update will not be completed correctly and normal opera- tion of the charging station is no longer guaranteed. Software Update Instructions V1.14 © KEBA... -
Page 10: Update Via Usb
1. 2) Lift the housing cover at bottom max. 1 cm and then push upwards 2. 3) Unscrew the four screws of the connection panel cover and remove the connection panel cover upwards. Software Update Instructions V1.14 © KEBA... -
Page 11: Perform Update
Mount covers In order to operate the charging station correctly, all covers must be inserted and screwed tight. Proceed as follows: Software Update Instructions V1.14 © KEBA... - Page 12 The housing cover must be correctly seated in the housing guide on all sides. 3) Fix the housing cover with 2 screws at the bottom. 4) Check that the charging station is functioning properly. Software Update Instructions V1.14 © KEBA...
Need help?
Do you have a question about the KeContact P30 X Series and is the answer not in the manual?
Questions and answers