Display High Resolution Weight - Cardinal 201 Installation, Technical And Operation Manual

5.18 Display High Resolution Weight

Hi res
With Hires displayed, press the F3/  key. The display will change to HirES=.
Proceed to the HirES= (Display High Resolution) parameter.
Hires= (Display High Resolution)
8400-M117-O1 Rev D
IMPORTANT! The Hires mode requires a load of 10% of Capacity
on the scale.
With HirES= displayed, press the F3/  key.
1.
The display will change to no.
2.
If you wish to skip high resolution weight display and return to the
3.
SETUP mode, press the F3/  key again.
Otherwise, place a calibrated test weight on the scale and press the
4.
F2/ key to toggle to yes and then press the F3/  key.
The display will change to show the amount of the test weight in
5.
"high resolution" mode (1/10 division), and an H will be displayed to
the right of the displayed weight.
Press the F3/  key to exit the Display High Resolution Weight and
6.
return to the normal operation mode.
Model 201 Installation & Technical
Page 105