Table of Contents
Advertisement
2. PRECAUTIONS
2.1 Static Electricity
8400-M117-O1 Rev D
CAUTION! This device contains static sensitive circuit cards
and components. Improper handling of these devices or
printed circuit cards can result in damage to or destruction of
the component or card. Such actual and/or consequential
damage IS NOT covered under warranty and is the
responsibility of the device owner. Electronic components
must be handled only by qualified electronic technicians who
follow the guidelines listed below.
WARNING! ALWAYS use a properly grounded wrist strap
when handling, removing or installing electronic circuit cards or
components. Make certain that the wrist strap ground lead is
securely attached to an adequate ground. If you are uncertain
of the quality of the ground, you should consult a licensed
electrician.
IMPORTANT! ALWAYS handle printed circuit card
assemblies by the outermost edges. NEVER touch the
components, component leads or connectors. ALWAYS
observe warning labels on static protective bags and
packaging and never remove the card or component from the
packaging until ready for use. ALWAYS store and transport
electronic printed circuit cards and components in anti-static
protective bags or packaging.
Model 201 Installation & Technical
Page 3
Hide quick links:
Advertisement
Table of Contents
