Media Share Setup - LG Pro Centric 55ET960H Setup Manual

IP Environment Setup (Cont.)

Media Share Setup

The Media Share Menu allows you to enable the following Media Share
features on this TV:
®
• LG Smart Share : Allows guests to use the TV to access and view
data shared by DLNA Certified
LAN as the TV.
• Screen Share: Enables screen sharing with a Miracast
Display (WiDi) capable device (e.g., a laptop with Intel
• Media Renderer: Enables the TV to act as a media renderer to
receive content from DLNA Certified devices on the same network.
• DIAL (Discovery and Launch): Allows guests to play selected
application media on the TV from a device with DIAL capability. The
device may be used to cast any application for which a TV-compatible
application has been created/selected for inclusion in the Pre-loaded
Apps Menu (e.g., YouTube—see also "Pre-loaded Applications"
on page 77). Note that the device must be connected to the same
network as the TV.
• SoftAP: Enables the TV to function as a 2.4 GHz wireless access
point for up to five devices. Note that a wired network connection
MUST be established in order for guests to use SoftAP.
• Beacon: Enables the TV to function as either an iBeacon™ or
Eddystone™ beacon device for Bluetooth broadcasting.
Note: See also Reference section, "Using Media Share Features," for
additional information on these features.
1. With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Media Share menu option. Then,
press the Wheel (OK) button.
2. Smart Share, Screen Share, Media Renderer, and DIAL features
may be enabled or disabled as follows: Use the Up/Down arrow
keys on the Installer Remote to select/highlight the desired feature,
and then press the Wheel (OK) button on the Installer Remote to
toggle the setting as required.
3. If you would like to enable SoftAP:
• Select/highlight SoftAP and press the Wheel (OK) button on the
Installer Remote.
• When you initially access the SoftAP screen (see example on
following page), the On/Off toggle button at the top right of the
screen is selected/highlighted by default. Press the Wheel (OK)
button on the Installer Remote to turn on SoftAP.
78
®
devices connected to the same
®
®
or Wireless
hardware).
MEDIA SHARE
Network
Pro:Centric
Smart Share
Screen Share
Portal Settings
Media Renderer
DIAL
TV Name
Media Share
^
xxx yyyyyy
SoftAP
Off
Beacon
Off
(Continued on next page)
206-4350