Ftg Mode - LG Pro Centric 55ET960H Setup Manual

Installer Menu
To create a Master TV Setup, you will need to know how to access the
commercial controller (PTC) Installer Menu and make changes to the
default values as required. If necessary, familiarize yourself with the
Installer Menu and how to make and save changes. See pages 40 to
50 for information on accessing the Installer Menu and for detailed
descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure a
Target TV. The Master TV's clonable setup menu features should be
configured as part of the Master TV Setup. If there are features in the
Master TV's setup—channel icons or labels, digital font options, etc.—
that are not set or that are set incorrectly, those features also will not be
set or will be set incorrectly in the Target TVs. See pages 54 to 60 for
information on Clone (.tlx) files and cloning requirements and procedures.
External Control
To control the TV using an external MPI control device, you must use the
TV's MPI port for communication purposes.
To control the TV using an external TLT control device, you must use
the TV's RS-232C port for communication purposes. See Reference
section, "TLT Communication Parameters," for further information.

FTG Mode

In this mode, the TV's CPU is configured with an FTG Channel Map, and
the CPU controls and restricts the tuning operation of the TV based on
this FTG Channel Map. The FTG Channel Map enables the decryption of
®
each Pro:Idiom encrypted channel and also provides logical channel
mapping of physical RF channels (digital and analog), IP streams, and
Aux inputs. In addition, in these models, dependingon the types of
channels included in the FTG Channel Map, FTG Mode provides the
option to select either logical or physical tuning (see notes below) during
configuration.
Note: Logical channel mapping of physical RF channels eliminates dash
tuning; for example, physical 19-3 can be mapped to logical channel 9.
It also allows physical RF channels, IP streams, and Aux inputs to be
listed in any order, not only in physical numeric ascending order. Physical
channel tuning requires that you include the dash when direct entering
RF channel numbers and Aux inputs (the latter designated by 130-0
through 137-0).
Note: Physical channel tuning is not available when IP channels are
included in the FTG Channel Map.
206-4350
Commercial Mode Overview (Cont.)
PTC INSTALLER MENU
xxET960H
CPU - CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 S3 03.14 7F78
PTC V#.##.### CPU V#.##.##.##
Typical Installer Menu
X
TV Setup Menus (Quick Settings)
PICTURE
Picture
Sound
Picture Mode Settings
Channels
Aspect Ratio Settings
16:9
Additional Settings
General
Safety
Accessibility
TV Setup Menus (Advanced Settings)
7