LG 55EW960H Commercial Mode Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 55EW960H
  6. Commercial mode setup manual

LG 55EW960H Commercial Mode Setup Manual

Hide thumbs Also See for 55EW960H:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2017 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
55EW960H
65EW960H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 41 – 43
Cloning Procedures
pages 44 – 49
P/N: 206-4307 (Rev C)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG 55EW960H

Summary of Contents for LG 55EW960H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 41 – 43 Cloning Procedures pages 44 – 49 P/N: 206-4307 (Rev C) © Copyright 2017 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Safety Warnings ........2 FTG File Manager Utilities Overview.

  • Page 6: Commercial Mode Overview

    TV’s CPU or Protocol Translation Controller (PTC), or it resides in a Pro:Centric application or an external device from the solution provider. These TV models support several different operational modes: LG’s Free-To-Guest (FTG) Mode via the TV CPU, Application Tuning Mode (ATM) with Pro:Centric application, or Pass-through Mode (default). When in Pass-through Mode, these TV models can also be externally controlled via Multiple Protocol Interface (MPI) or TV-Link Monitor (TLM) interface (RS-232C).

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the PTC INSTALLER MENU commercial controller (PTC) Installer Menu and make changes to the xxEW960H default values as required. If necessary, familiarize yourself with the CPU - CTV Installer Menu and how to make and save changes.
  • Page 8 • TV Zoning (including channel restrictions by Zone) and Wi-Fi Zoning options for location-specific configuration. LG’s FTG File Manager PC software enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. FTG File Manager utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings.

  • Page 9: Application Tuning Mode / Pro:centric Direct

    While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made...
  • Page 10 Commercial Mode Overview (Cont.) ASPECT RATIO Aspect Ratio Function Menu TV Setup Menus Sound Out Indicates the TV is not in Shows that the TV is in Aspect Ratio 16:9 Pass-through Mode . While Pass-through Mode . Audio Mode the TV is in this mode, Installer Menu settings can General be accessed as read-only.

  • Page 11: Pro:centric Operation

    Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features Both the Pro:Centric Java application and the Pro:Centric Direct HTML application enable guests to locate and select television entertainment, check the daily weather, view hotel and surrounding amenities, etc.,...
  • Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4307...
  • Page 13 Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and/or PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 14: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode, use the FTG File Manager software to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV.
  • Page 15 Pro:Centric Operation (Cont.) • Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See “Accessing the IP Environment Menu” on page 56 and “Pro:Centric Setup” on pages 60 to 62 for further information.

  • Page 16: Ez-Manager Wizard

    EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. Note: The Installer Remote shipped with the EW960H TV models supports MMR operation, which is enabled by default.

  • Page 17: Initiate Configuration Or Exit The Ez-Manager Wizard

    EZ-Manager Wizard (Cont.) • If you would like to enable the DIAL and/or SoftAP Media Share features or select pre-loaded/ Smart Launcher applications on a TV that will eventually be configured for FTG Mode, you will need to use the IP Environment Menu to do so before the TV is configured for FTG Mode. Refer to “IP Environment Setup”...

  • Page 18: Tv Configuration Options

    EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature(s) on the TV for location-specific configuration purposes, select the “Zones &...
  • Page 19 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONES, LABEL, AND ROOM NUMBER Wi-Fi Zone If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi <...

  • Page 20: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric server.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example, “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
  • Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then press the Wheel (OK) button. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
  • Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.

  • Page 24: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
  • Page 25 EZ-Manager Wizard (Cont.) (Continued from previous page) 2. Use the arrow keys on the Installer Remote to select USB CONFIGURATION, and then press the Wheel (OK) button. You will be redirected to the TV Manager / USB download options. TV MANAGER Ez Download USB DEVICE USB 1: Device Name...

  • Page 26: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files (one of each file type) at one time from the files loaded on a USB memory device. You may use this utility to download a TV CPU software update, a PTC software update, and/or a Clone or FTG Configuration (.tlx) file to a TV.
  • Page 27 Ez Download Utility (Cont.) (Continued from previous page) Note: In order for the proper location-specific TV Zone and/or Wi-Fi Zone profile data to be applied, the Zone designation(s) must be assigned in the Target TV(s) BEFORE you continue with the Ez Download utility. 4.
  • Page 28 Ez Download Utility (Cont.) (Continued from previous page) 7. If it is not currently selected, use the arrow keys to select Ez Download, and then press the Wheel (OK) button. As illustrated on the previous page, when Ez Download is selected, a list of up to three files is displayed on the screen, one each of the TV Software (CPU) and PTC Software files stored in the LG_DTV folder and the Clone/Configuration (.tlx) files stored in the root directory on the USB device.
  • Page 29 Ez Download Utility (Cont.) (Continued from previous page) Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress. When the Ez Download process is complete, an overview of the results will briefly be displayed and then, the TV will reboot. 11.

  • Page 30: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV using an FTG Configuration (.tlx) file created using LG’s FTG File Manager software. Refer to the table on pages 32 and 33 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.

  • Page 31: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 33 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 34: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE 003 - BAND/AFC (Band/Automatic Frequency Control) Specifies entry sequence to the Installer Menu. There are four possible settings for this option: 0 = Broadcast 1 = CATV (default) 0 = 9876 1 = 4321 2 = HRC...
  • Page 35 Installer Menu (Cont.) 015 - SLEEP TIMER NOTE: For items 007, 008, and 009 If set to 1, the Sleep Timer feature may be used. If set to 0, the For legacy reasons, the scale used is 0 – 63. The PTC software Sleep Timer is not available.
  • Page 36 Disabled External Speaker (Optical/HDMI ARC) 041 - SIMPLINK EN Enabled LG Sound Sync (Optical) Set to 0 to disable the SIMPLINK feature. Set to 1 to enable Disabled LG Sound Sync (Optical) SIMPLINK functionality (does not enable remote control access to the SIMPLINK Menu).
  • Page 37 Installer Menu (Cont.) 053 - DIS. CH-TIME (Disable Channel-Time Display) 080 - UPN MSB-2 (UPN Most Significant Byte-2) Set to 1 to disable the TV’s native Channel-Time display when a User programmable number, most significant byte-2 readable by custom channel label/channel information will be provided by the MPI command.
  • Page 38 (Java Application) Mode, please note that the MMR operation is when the Function Menu is available. incompatible with LG’s Java application. Either set Installer Menu item 101 IR FEEDBACK to 2 in order to disable the TV’s MMR 096 - DEF. ASP. RATIO (Default Aspect Ratio) feature, or use a standard IR remote with the TV.
  • Page 39 If set to 0 (default), the TV’s MMR (Magic Motion Remote) feature the TV(s),” for further information. is enabled, and a compatible LG MMR may be used with the TV. If set to 2, the MMR feature is disabled. 119 - DATA CHANNEL Note: The Installer Remote shipped with the EW960H TV models Set to 0 to disable.
  • Page 40 Installer Menu (Cont.) 121 - UPDATE TIME HR If the TV display is ON when a Wake For Update event is to occur, Based on the settings of this item and item 122 UPDATE TIME MN, the update will take place the next time the TV is turned OFF. the Wake For Update feature wakes the TV once daily to check for Note: This item is not available in the Installer Menu when item and, if applicable, download updates from the Pro:Centric server.

  • Page 41: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode.

  • Page 42: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2.
  • Page 43 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press the PICTURE PICTURE button on the Installer Remote, and select the All Settings menu Picture icon from the Quick Settings Menu to access the advanced TV setup menus.

  • Page 44: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the FTG File Manager and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 45 Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Update TV Software Update TV Software Current TV Software Version: version# EW960H_CPU_SW.epk Update PTC Software filename .epk/Version: version# Update PTC Software...

  • Page 46: Importing A Clone File

    Cloning Procedures (Cont.) (Continued from previous page) 9. Modify the filename, as required. While the TV model element of the filename may not be changed, you can differentiate this Clone file from other EW960H Clone files by changing the numeric assignment appended to the end of the filename. Select/highlight the filename, and then use the Up/Down arrow keys on the Installer Remote to scroll through numeric assignments until the desired number is shown.
  • Page 47 Cloning Procedures (Cont.) • If the Target TV is currently in Pass-through Mode and you intend to use the TV’s Zoning feature(s)—i.e., the Clone/Configuration (.tlx) file you are importing contains an FTG Channel Map and/or FTG profile(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to assign the appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure below.
  • Page 48 Cloning Procedures (Cont.) (Continued from previous page) Note: In order for the proper location-specific TV Zone and/or Wi-Fi Zone profile data to be applied, the Zone designation(s) must be assigned in the Target TV(s) BEFORE importing is initiated. 4. Insert the USB memory device with the Clone/Configuration (.tlx) file into either of the USB ports on the Target TV.
  • Page 49 Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Import Clone File USB DEVICE USB 1: Device Name Ez Download Select the file to download, and then select UPDATE below. Update TV Software xxEW960H-UA_1.TLX Update PTC Software Channel Tuning / Channel Banner Display EW960H_ChMap_IM.tlx Logical Import Clone File...

  • Page 50: Creating An Ftg Configuration File

    FTG File Manager Utilities Overview (Cont.) This section provides an overview of the FTG File Manager, which is used for FTG Mode configuration. FTG File Manager software is available online at: www.lg.com/us/business/display-solutions/ftg. Creating an FTG Configuration File The procedure below describes how to use the FTG File Manager utilities (see sample screens on pages 52 to 55) to create an FTG Configuration (.tlx) file that can be saved to a USB memory device.

  • Page 51: Ftg File Manager Utilities Overview

    FTG File Manager Utilities Overview (Continued from previous page) Note: To clear the current TLX File Contents, click the New button in the TLX File command section of the FTG File Manager main screen (above the TLX File Contents window). 3.

  • Page 52: Ftg File Manager Main Screen

    FTG File Manager Utilities Overview FTG File Manager Main Screen The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx) files. It also allows you to change the Zone assignment for each Installer Menu profile, if desired (see Reference section, “Using the TV’s Zoning Features,”...

  • Page 53: Ftg Channel Map Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. EDIT/ADD MAP PRINT MAP Click to open the FTG Click to display a printable Channel Map Editor to create FTG Channel Map Report.

  • Page 54: Ftg Channel Map Editor

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number. Then, Enter custom labels and select icons by Check/select Encrypted, OSD, assign the RF, Major, and Minor channel...

  • Page 55: Ftg Installer Menu Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Installer Menu Configuration Utility CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters.

  • Page 56: Ip Environment Setup

    IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 41 to 43), all IP Environment settings, with the exception of Wired Network Connection settings, the TV name (editable in the Media Share Menu), DIAL, and SoftAP settings, may be cloned.
  • Page 57 IP Environment Setup (Cont.) Configuring a Wired Network Connection Note: If desired, you can configure both wired and wireless NETWORK SETT... connections. However, note that a wired connection is always prioritized over a wireless connection. That is, when the TV is Network Network / turned OFF and then back ON, if a LAN cable is detected between...
  • Page 58 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully, a “Connected to Internet” message will appear just below the progress display. If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling and/or verify the configuration data, as necessary.
  • Page 59 IP Environment Setup (Cont.) IP Stream Control If necessary, due to an audio and/or video stream delay, IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS and video PTS offset modifications. This menu also enables you to specify the IGMP version (2 or 3). Note that any modifications to these settings should be performed by qualified personnel only.

  • Page 60: Pro:centric Setup

    IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to configure the TV with the appropriate settings to connect to the Pro:Centric server. Use the Up/Down arrow PRO:CENTRIC keys on the Installer Remote to navigate between fields. Network 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Pro:Centric menu option.
  • Page 61 IP Environment Setup (Cont.) (Continued from previous page) IP Configuration Note: If the server IP address and port number or domain name have already been set in the EZ-Manager Wizard, the specified data will be reflected in the fields displayed. Note: Setting the Media Type to “IP”...

  • Page 62: Media Share Setup

    : Allows guests to use the TV to access and view data shared either by ® wired DLNA Certified devices connected to the same LAN as the TV or by wireless LG ® devices using LG’s Smart Share application with Wi-Fi Direct ®...
  • Page 63 • Select the appropriate values in the Wi-Fi Signal Strength and displayed since enabling Bluetooth Sound Sync renders Wireless LG Wi-Fi Channel fields, as required. Sound Sync unavailable. Select 4. If desired, you can specify a name for this TV so that it is easy Yes to continue.

  • Page 64: Pre-Loaded Applications

    IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’s Smart Launcher, which appears along the PRE-LOADED... bottom of the screen. Network When the Pro:Centric application is disabled, the Smart Launcher is available to end users via the PORTAL button on the remote control.

  • Page 65: Remote Jack Pack / Tv Connections & Setup

    Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1).

  • Page 66: Updating Tv/Ptc Software Using A Usb Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.
  • Page 67 Reference: Updating TV/PTC Software using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Update TV Software Update TV Software Current TV Software Version: version# EW960H_CPU_SW.epk Update PTC Software...

  • Page 68: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 55EW960H 65EW960H Item 099 Power Power Back Lighting Percent Percent Consumption Consumption (Static) Savings Savings (Watts) (Watts) 152.0...

  • Page 69: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS Installer STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Menu Item Installer Menu 0x41 SOURCES CURRENT AV 046 START ENABLED (R/W) SOURCE (R) SOURCE (R) AUX SRCE (Start Aux Installer...

  • Page 70: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page.
  • Page 71 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 72: Rjp Model List & Input Auto-Sensing Hierarchy

    Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-301B RJP Input Auto-sensing Hierarchy Priority Video Audio...

  • Page 73: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its current mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 74: Using The Tv's Zoning Features

    Reference: Using the TV’s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the EW960H model TVs. These features are primarily intended for use when the TV is configured for FTG Mode operation; however, Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and Setup Menu profile Zone assignments), may also be used with TV cloning processes using a USB memory device / “.tlx”...
  • Page 75 Reference: Using the TV’s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG Channel Map Editor overview on page 54. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
  • Page 76 Reference: Using the TV’s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Configuration A location-specific Wi-Fi configuration / Clone (.tlx) file may be saved (exported) from a Master TV and then be used to configure Target TVs. First, the wireless network (i.e., the access point login data) must be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network Connection”...
  • Page 77 Reference: Using the TV’s Zoning Features (Cont.) (Continued from previous page) To change the TV Zone, select/highlight the TV Zone field and press the Wheel (OK) button. Then, use the Left/Right arrow keys to specify the desired TV Zone # (0–8). Press the Wheel (OK) button when you are finished.

  • Page 78: Using Media Share Features

    Smart Share with Wi-Fi Direct The following steps describe how to access and use Wi-Fi Direct (i.e., to connect to a wireless LG device). Remember that you must also turn ON Wi-Fi Direct and launch the Smart Share application on the LG device.
  • Page 79 GENERAL WI-FI DIRECT Picture Picture General / REFRESH LIST Sound Sound Language [TV]LG Smart TV Note: The example at left Room Info shows the General Menu when Channels Channels Time & Date the TV is in Pass-through Mode. Timers The Wi-Fi Direct screen is the...
  • Page 80 Reference: Using Media Share Features (Cont.) Screen Share (Miracast / WiDi) The following steps describe how to access and use the Miracast / WiDi features. Note: This procedure describes how to access Screen Share from the TV’s Smart Launcher. If the TV is not in Pass-through Mode, it is also possible to access Screen Share from the TV’s General Menu.
  • Page 81 Reference: Using Media Share Features (Cont.) SoftAP The following steps describe how to access and use the SoftAP feature. Note: This procedure describes how to access SoftAP using the Wi-Fi Service option available from the TV’s Smart Launcher. It is also possible to access SoftAP from the TV’s General Menu. 1.

  • Page 82: Ew960H Rear And Side Jack Panels

    Reference: EW960H Rear and Side Jack Panels SPEAKER OUT / LINE OUT AUX LAN & LAN (3.5 mm jack) Connect external audio (fixed speaker, Use for video IP and/or network connections. variable speaker, or fixed line level [amplifier]) equipment. See Reference section, “External Stereo AV IN/AUDIO IN (DVI) Speaker Specifications,”...

  • Page 83: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the EW960H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 84: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 85: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4307...

  • Page 86: Commercial Mode Check

    Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press the button on the Installer Remote.

  • Page 87: Glossary Of Terms

    Refers to a particular commercial mode of like analog channels, to be tuned without re- elements. The proper Admin Client must be operation within an LG TV. See also FTG quiring the dash key. Also, channels (analog used in accordance with licensed (Java or Mode.

  • Page 88: Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.

  • Page 89: Back Cover

    Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric, Smart Share, and the “LG” logo are registered trademarks of LG Electronics Inc. DLNA Certified is a registered trademark of Digital Living Network Alliance. Intel is a registered trademark of Intel Corporation in the U.S.

This manual is also suitable for:

65ew960h

Table of Contents