LG Pro Centric 55ET960H Setup Manual page 58

Cloning Procedures (Cont.)
Import Clone File Procedure
1. Turn ON the Target TV.
2. The next step depends on whether the First Use Wizard appears on the screen when you turn
ON the TV:
• If the wizard is displayed, you can complete the import procedure via the EZ-Manager Wizard,
as indicated above (see "Before You Begin"). However, to continue with this procedure and
access the "Import Clone File" option from the TV menus, exit the First Use Wizard. Then,
continue with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If applicable (see also "Before You Begin" above), make sure to set the appropriate TV Zone #
and/or Wi-Fi Zone # in the Target TV at this time.
Note: In order for the proper TV Zone and/or Wi-Fi Zone profile data to be applied,
the appropriate TV Zone # and/or Wi-Fi Zone # must be set in the Target TV BEFORE
importing is initiated.
4. Insert the USB memory device with the Clone/Configuration (.tlx) file into either of the USB
ports on the Target TV.
5. Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the left of the
screen, select the All Settings
advanced TV setup menus.
7. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number "7" key
a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB 1: Device Name
Select the desired option below.
Ez Download
Icon Download
58
menu icon and press the Wheel (OK) button to access the
Data Cloning Image Download
Video Download Software Update
X
DIAGNOSTICS: ON USB DEVICE
(Continued on next page)
206-4350