Table of Contents
Advertisement
Pro:Centric Operation (Cont.)
Pro:Centric Direct HTML Application Setup
The Pro:Centric Direct HTML application operates only in Application Tuning Mode (ATM). This section
provides an overview of the setup required for the Pro:Centric Direct features. Administration and
management options for the Pro:Centric server are described in detail in the Pro:Centric Direct Admin
Client User Guide. This document describes only those settings that must be specified on the TVs to
enable Pro:Centric remote management and/or the Pro:Centric Direct HTML application.
• Remote management (TV E-Z Installation): The Pro:Centric Direct Admin Client provides remote
management facilities for downloading software updates as well as facilities for downloading Installer
Menu configuration updates via Clone (.tlx) file to the TVs at the site/institution.
Note: The Pro:Centric Direct Channel Map is created and maintained in the Pro:Centric Direct Admin
Client. Thus, any Clone file that is loaded on the server for remote configuration may only contain Installer
Menu and/or Setup Menu profiles.
• Pro:Centric Direct HTML application: The application comprises the Pro:Centric interactive menus/features
described on page 11. Pro:Centric Direct application settings are managed via the Pro:Centric Direct
Admin Client.
The Pro:Centric remote management facilities and application download are based on Installer Menu
item settings that are used to set up the TV's Pro:Centric features. The Installer Menu / Pro:Centric server
settings can be configured using one of the methods described below.
TV in Factory Default State
When the TV is in a factory default state, LG's First Use Wizard provides automated or manual options
for configuring the TV's Pro:Centric server settings. See "First Use Wizard" on pages 16 to 17 for further
information. The First Use / EZ-Manager Wizard also provides a USB configuration option that enables
you to configure the TV's Installer Menu settings using a Clone (.tlx) file stored on a USB memory device.
Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL are used to set up the TV's Pro:Centric
features.
TV in Pass-through Mode
If the First Use Wizard has been exited and the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 40 to 50 for further details. Also, as necessary, refer to
"Custom Master TV Setup" on pages 51 to 53 and/or cloning information on pages 54 to 60.
• Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You
must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See
"Accessing the IP Environment Menu" on page 67 and "Pro:Centric Setup" on pages 72 to 75 for
further information.
Note: When the TV is in either Pass-through Mode or Application Tuning Mode, you can also leave
Installer Menu item 119 DATA CHANNEL set to its default value (255) to enable the TV's Data Channel
Auto Search feature to set the DATA CHANNEL value. See item 119 description on page 49 for additional
information.
14
206-4350
Hide quick links:
Advertisement
Table of Contents
