Ip Environment Setup; Accessing The Ip Environment Menu; Network Configuration - LG Pro Centric 55ET960H Setup Manual

Lodging guest interactive commercial mode setup guide

Table of Contents

The IP Environment Menu enables you to set up the network features of the TV. If you intend to

create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 51

to 53), all IP Environment settings, with the exception of wired network (Ethernet) settings, LG

Connect settings, the TV name (editable in the Media Share Menu), and SoftAP settings, may be

cloned.

Note: With the exception of network settings, the IP Environment settings are editable (with

the Installer Remote) only if the TV is in Pass-through Mode and read-only when the TV is not in

Pass-through Mode.

Accessing the IP Environment Menu

Note: When you enter the IP Environment Menu, the Installer Menu is exited (all current settings

are saved automatically upon exit). If you are also in the process of updating Installer Menu items,

you may wish to set all items as needed before you access the IP Environment Menu. Otherwise,

after exiting the IP Environment Menu, you will need to reaccess the Installer Menu to set additional

items.

1. Use the Installer Remote to access the Installer Menu (see "Accessing the Installer Menu" on page

40 for further information).

2. Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3 + the

the IP Environment Menu.

Use the Up/Down arrow keys on the Installer Remote to select the desired menu option and

then press the Wheel (OK) button. Refer to the following sections for information on each of the IP

Environment setup options.

When you have completed your IP Environment configuration as required, press BACK/EXIT

on the Installer Remote to exit the IP Environment Menu.

Network Configuration

This section describes each of the options available in the Network

Menu (see example at right). Refer to the appropriate subsection(s)

on the following pages.

Note: If you intend to use the Wi-Fi Zoning feature with

cloning configuration, you must configure the wireless

network connection as part of the Master TV Setup. See

"Configuring a Wi-Fi Network Connection" on pages 69

to 70 for further information.

Accessing the Network Menu

With the IP Environment Menu on display, use the arrow keys on the

Installer Remote to select the Network menu option. Then, press the

Wheel (OK) button.

Note: The TV's MAC address is displayed at the top of the Network

Menu screen and cannot be modified.

206-4350