LG Pro Centric 55ET960H Setup Manual page 29

(Continued from previous page)
If the process is successful, no further user interaction is required, though, in some instances,
where the option (for example, "NEXT") is available, you may manually move forward to subsequent
steps within the wizard to speed up the process.
PROCESSING THE PRO:CENTRIC CONFIGUR...
Downloading the Pro:Centric application files takes a few minutes.
Please wait...
2%
Retrieving files from data channel 70
Application files In progress...
Maintenance files Synchronizing...
Warning - Do not remove AC power or the signal cables during these steps.
Note: If, after completing the search, the TV is unable to find the Pro:Centric data channel (while the
Searching for Pro:Centric Server screen is on display), the wizard will stop and show a Diagnostics
screen that enables you to manually return to the previous screen (to reinitiate the configuration) or
exit the wizard.
When the Pro:Centric Configuration is complete, an EZ-Manager Configuration Complete screen is
displayed (see example below), and after 10 seconds, the wizard exits, and the TV turns OFF.
EZ-MANAGER CONFIGURATION COMPLETE
TV will turn off in 10 second(s)
Installed Components
Pro:Centric Application GEM application downloaded
Pro:Centric Application
Maintenance files Config.tlx
Maintenance Files
REBOOT TURN OFF
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press the
Wheel (OK) button on the Installer Remote.
206-4350
Installed Components
GEM application downloaded
LY970H_Config.tlx
EZ-Manager Wizard (Cont.)
(Continued on next page)
29