Using Media Share Features - LG Pro Centric 55ET960H Setup Manual

When the appropriate Media Share options are enabled in the IP Environment / Media Share Menu (see
"Media Share Setup" on pages 78 to 80, as necessary), guests have the ability to use one or more of
the following Media Share features:
• Smart Share: Allows guests to use the TV to access and view media files (photos, videos, music, etc.)
shared by DLNA Certified devices (the devices must be connected to the same LAN as the TV).
• Screen Share: Allows guests to select a Miracast or WiDi capable device, whose screen can be displayed
on the TV.
• DIAL: Allows guests to play selected application media on the TV from a device with DIAL capability.
The device may be used to cast any application for which a TV-compatible application has been created/
selected for inclusion in the Pre-loaded Apps Menu (see "Pre-loaded Applications" on page 77).
• SoftAP: Allows guests to use the TV as a 2.4 GHz wireless access point for up to five devices.
This section provides an overview of the Smart Share, Screen Share, DIAL, and SoftAP functionality.
Note: Typically, only one Media Share feature may be used at a time. If one feature is
currently in use, you may have to exit or turn it off in order to use/turn on another. In some
cases, you will be prompted to confirm your action. Follow the display prompts as necessary.
Smart Share (DLNA Certified Devices)
The following steps describe how to access and use the Smart Share feature with DLNA Certified devices
on the same LAN as the TV.
1. Turn ON the TV.
2. To access media files/folders on the TV, press the
Left/Right arrow keys to select Music or Photo & Video from the TV's Smart Launcher.
Note: If the TV is not in Pass-through Mode, it is also possible to access the Music and Photo & Video
options from the General Menu.
3. In the next screen (Music or Photo & Video, depending on your selection in the previous step), select
the desired Smart Share device, and then select the desired file(s) to view.
Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
Note: This procedure describes how to access Screen Share from the TV's Smart Launcher. If the TV is
not in Pass-through Mode, it is also possible to access Screen Share from the TV's General Menu.
1. Turn ON the TV, and then press the
2. Use the Left/Right arrow keys on the Installer Remote to select Screen Share, and then press the Wheel
(OK) button.
Note: If Screen Share is not currently available in the Smart Launcher, you may need to exit/turn
off another Media Share feature in order to use Screen Share. For example, select Wi-Fi Service
(SoftAP) in the TV's Smart Launcher, and make sure that SoftAP is turned off. See also note above
regarding simultaneous use of Media Share features.
3. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the TV screen into your
Miracast / WiDi connection window to complete the connection.
Once the connection is established, the TV display may be used as a second screen for the Miracast /
WiDi device.
206-4350
Reference: Using Media Share Features
button on the Installer Remote, and use the
button on the Installer Remote to display the TV's Smart Launcher.
99