Table of Contents
Advertisement
IP Environment Setup (Cont.)
(Continued from previous page)
2. Make sure the Portal Mode is set to "Default Portal." If necessary,
select/highlight the Portal Mode field and press OK on the Installer
Remote to display the drop-down list of options. Then, use the Up/
Down arrow keys to select Default Portal.
3. Use the arrow keys on the Installer Remote to select Pre-loaded
Apps. Then, press OK.
4. In the Pre-loaded Apps Menu (see example at right), a list of
available application options is displayed. Use the Up/Down arrow
keys to highlight each application you wish to select or de-select,
and press OK on the Installer Remote. When an application is
selected, the radio button at the left of the application name is red.
Note: Though not included in the application list on this screen,
Screen Share and SoftAP (as Wi-Fi Service) applications are
available in the Smart Launcher once they are enabled in the
Media Share Menu. See "Media Share Setup" below.
5. When you are done selecting the pre-loaded application icons to
be displayed in the Smart Launcher, as required, use the arrow
keys on the Installer Remote to return to the IP Environment Menu,
as necessary, or press
Note: While pre-loaded application selections are clonable, it is not
possible to edit pre-loaded application selections in the Cloud
Configuration Tool. Thus, if a TV has already been configured for FTG
Mode and you would like to add or remove applications, you will need
to import a new ".tlx" file with the appropriate model profile. That is, you
will need to use a Master TV of the same model to create and export a
".tlx" file with the desired pre-loaded application selections (along with
any other applicable Installer Menu settings), which can be transferred
(imported) to the Target TV.
Media Share Setup
The Media Share Menu allows you to enable the following Media Share
features on this TV:
®
• LG Smart Share
: Allows guests to use the TV to access and view
data shared by DLNA Certified
LAN as the TV or by wireless LG devices using LG's Smart Share
application with Wi-Fi Direct
• Screen Share: Enables screen sharing with a Miracast
Display (WiDi) capable device (e.g., a laptop with Intel
• Media Renderer: Enables the TV to act as a media renderer to
receive content from DLNA Certified devices on the same network.
74
to exit the IP Environment Menu.
®
devices connected to the same
®
.
®
or Wireless
®
hardware).
PRE-LOADED...
Network
Portal Settings /
Pro:Centric
Application1
Application2
Portal Settings
Application3
Application4
Media Share
Application5
Web Browser
Default Home
^
Notes:
•
Make sure to select any application(s)
that may be used in conjunction with
the DIAL feature, if applicable.
•
If desired, with the Web Browser
application, you may specify the
default home page.
(Continued on next page)
206-4354
Advertisement
Table of Contents
