Pro:centric Direct Html Application Setup - LG 55EU960H Setup Manual

Pro:Centric Operation (Cont.)
TV in FTG Mode
If the TV is already in FTG Mode, use the Cloud Configuration Tool to update Installer Menu items #98
Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu
settings to the TV. Refer to the FTG Mode overview on pages 7 to 8 for further information on FTG Mode
operation and configuration. Also, see note above regarding the option to use the TV's Data Channel Auto
Search feature to set the DATA CHANNEL value.

Pro:Centric Direct HTML Application Setup

The Pro:Centric Direct HTML application operates only in Application Tuning Mode (ATM). This section
provides an overview of the setup required for the Pro:Centric Direct features. Administration and
management options for the Pro:Centric server are described in detail in the Pro:Centric Direct Admin
Client User Guide. This document describes only those settings that must be specified on the TVs to
enable Pro:Centric remote management and/or the Pro:Centric Direct HTML application.
• Remote management (TV E-Z Installation): The Pro:Centric Direct Admin Client provides remote
management facilities for downloading software/firmware updates as well as facilities for downloading
Installer Menu configuration updates via Clone (.tlx) file to the TVs at the site/institution.
Note: The Pro:Centric Direct Channel Map is created and maintained in the Pro:Centric Direct Admin
Client. Thus, any Clone file that is loaded on the server for remote configuration may only contain Installer
Menu and/or Setup Menu profiles.
• Pro:Centric Direct HTML application: The application comprises the Pro:Centric interactive menus/features
described on page 11. Pro:Centric Direct application settings are managed via the Pro:Centric Direct
Admin Client.
The Pro:Centric remote management facilities and application download are based on Installer Menu
item settings that are used to set up the TV's Pro:Centric features. The Installer Menu / Pro:Centric server
settings can be configured using one of the methods described below.
TV in Factory Default State
When the TV is in a factory default state, LG's First Use Wizard provides automated or manual options for
configuring the Pro:Centric server settings. See "First Use Wizard" on pages 16 to 17 for further information.
The First Use / EZ-Manager Wizard also provides a USB configuration option that enables you to configure
the TV's Installer Menu settings using a Clone (.tlx) file stored on a USB memory device. Installer Menu
items 098 PRO:CENTRIC and 119 DATA CHANNEL are used to set up the TV's Pro:Centric features.
Note: If Pro:Centric data delivery will be over IP, there is a Domain Name System (DNS) server at the
site, and you intend to use the EZ-Manager Wizard to set up the TV, you can create a "procentric.local"
DNS entry for the Pro:Centric server that will enable automated Pro:Centric IP configuration via the
EZ-Manager. If there is no DNS entry for procentric.local, you will need to manually enter the Pro:Centric
server IP address and port number during configuration.
TV in Pass-through Mode
If the First Use Wizard has been exited and the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 38 to 48 for further details. Also, as necessary, refer to
"Custom Master TV Setup" on pages 49 to 51 and/or cloning information on pages 52 to 58.
14
206-4334