Status; Behaviors Of Ri - Quectel BG95 Series Hardware Design

3.13. STATUS

The STATUS pin is used to indicate the operation status of BG95 module. It will output high level when
the module is powered on.
The following table describes the pin definition of STATUS.
Table 19: Pin Definition of STATUS
Pin Name Pin No.
STATUS 20
The following figure shows a reference circuit of STATUS.

3.14. Behaviors of RI*

AT+QCFG="risignaltype","physical" command can be used to configure RI behavior.
No matter on which port URC is presented, URC will trigger the behavior of RI pin.
The default behaviors of RI are shown as below.
BG95_Hardware_Design
I/O Description
DO Indicate the module's operation status
Figure 20: Reference Circuit of STATUS
LPWA Module Series
BG95 Hardware Design
Comment
1.8V power domain
49 / 80