Quectel BG95 Series Hardware Design page 17

Table 3: Key Features of BG95 Series Modules
Features
Power Supply
Transmitting Power
LTE Features
GSM Features
Internet Protocol
Features*
SMS
BG95_Hardware_Design
Details
BG95-M1/-M2/-N1:
 Supply voltage: 2.4V~4.8V
 Typical supply voltage: 3.3V
BG95-M3:
 Supply voltage: 3.3V~4.3V
 Typical supply voltage: 3.8V
Class 5 (20dBm±2dB) for LTE-FDD bands
Class 4 (33dBm±2dB) for GSM850
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Class 1 (30dBm±2dB) for PCS1900
Class E2 (27dBm±3dB) for GSM850 8-PSK
Class E2 (27dBm±3dB) for EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK
Class E2 (26dBm±3dB) for PCS1900 8-PSK
Support LTE Cat M1 and LTE Cat NB2
Support 1.4MHz RF bandwidth for LTE Cat M1
Support 200KHz RF bandwidth for LTE Cat NB2
Support SISO in DL direction
Cat M1: Max. 589Kbps (DL)/1.12Mbps (UL)
Cat NB2: Max. 136Kbps (DL)/150Kbps (UL)
GPRS:
 Support GPRS multi-slot class 33 (33 by default)
 Coding scheme: CS-1, CS-2, CS-3 and CS-4
 Max. 107Kbps (DL), Max. 85.6Kbps (UL)
EDGE:
 Support EDGE multi-slot class 33 (33 by default)
 Support GMSK and 8-PSK for different MCS (Modulation and Coding
Scheme)
Downlink coding schemes: CS 1-4 and MCS 1-9

 Uplink coding schemes: CS 1-4 and MCS 1-9
Max. 296Kbps (DL), Max. 236.8Kbps (UL)

Support PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT/
CoAP protocols
Support PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol) protocols which are usually used for
PPP connections
Text and PDU mode
Point to point MO and MT
SMS cell broadcast
LPWA Module Series
BG95 Hardware Design
16 / 80