Ceiling Fan Assembly - Emerson PRIMA SNUGGER CF905BS01 Owner's Manual

5.1
Remove and retain One 10-24 x 3/8" Pan Head Screw
with Lockwasher nearest the Hook on the Ceiling
Mounting Plate (Figure 8).
Loosen the remaining Two 10-24 x 3/8" Pan Head
Screws several turns (Figure 8).
5.2
While still attached to the Ceiling Mounting Plate Hook,
pivot the Fan Motor Assembly upwards and mate it up
against the Ceiling Mounting Plate.
Align and rotate the Fan Motor Assembly to engage
the Two Keyhole Slots with the Ceiling Mounting Plates
Two Loosened Screw Heads (Figure 9).
Securely tighten both 10-24 x 3/8" Pan Head Screws
(Figure 9).
Reinstall the previously removed 10-24 x 3/8" Pan
Head Screw with Lockwasher to secure the Fan Motor
Assembly onto the Ceiling Mounting Plate (Figure 9).
5.3
Loosen Two Opposing 10-24 x 3/8" Pan Head Screws
and Remove the Two remaining 10-24 x 3/8" Pan Head
Screws from the Outer Rim of the Ceiling Mounting
Plate (Figure 10).

5. Ceiling Fan Assembly

LOOSEN TWO
10-24 x 3/8" PAN
HEAD SCREWS WITH
LOCKWASHERS
REMOVE ONE
10-24 x 3/8" PAN HEAD
SCREW WITH LOCKWASHER
Figure 8
KEY HOLE SLOT
Figure 9
LOOSEN TWO OPPOSING
10-24 x 3/8" SCREWS
Figure 10
8
CEILING
MOUNTING
PLATE
10-24 x 3/8" PAN
HEAD SCREW
WITH
LOCKWASHER (3)
FAN MOTOR
ASSEMBLY
CEILING MOUNTING
PLATE OUTER RIM
REMOVE TWO OPPOSING
10-24 x 3/8" SCREWS
CEILING MOUNTING
PLATE
FAN MOTOR
ASSEMBLY
U.L. Model No.: CF905-1