Table of Contents
Advertisement
Quick Links
READ AND SAVE THESE INSTRUCTIONS
™
ZURICH
Ceiling Fan Owner's Manual
Model Number
CF935ORB02
Oil Rubbed Bronze
21.1
Net Weight:
Lbs.
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday
1-800-654-3545
www.emersonfans.com
Part No. F40BP73100002
Form No. BP7310-2
Revision: 130909
U.L. Model No.: CF935
Advertisement
Table of Contents
Related Manuals for Emerson ZURICH CF935ORB02
Summary of Contents for Emerson ZURICH CF935ORB02
- Page 1 CF935ORB02 Oil Rubbed Bronze 21.1 Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-654-3545 www.emersonfans.com Part No. F40BP73100002 Form No. BP7310-2 Revision: 130909 U.L. Model No.: CF935...
-
Page 2: Safety Instructions
Emerson Additional Safety Instructions for Installation Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson could 1. To avoid possible shock, be sure electricity is turned result in personal injury or property damage. -
Page 3: Unpacking Instructions
Emerson Electric Co. Substitution of parts or acces- LOOSE sories not designated for use with this product by PARTS Emerson Electric Co. -
Page 4: How To Put Your Ceiling Fan Together
How to Put Your Ceiling Fan Together 1. Remove the hanger ball by loosening the setscrew 5. Make sure the grommet is properly installed in the in the hanger ball until the ball falls freely down the coupling cover, then slide the coupling cover on the downrod (Figure 1). - Page 5 12. Engage the connector of the switch housing WARNING assembly with the motor connector (Figure 7). The two connectors are keyed and color-coded To reduce the risk of personal injury, do not bend the and must be mated correctly (color-to-color) blade flange when installing the blade flanges, before they can be engaged.
-
Page 6: Electrical Requirements
Electrical Requirements WARNING Your new ceiling fan will require a grounded electrical To reduce the risk of fire, electric shock, or personal supply line of 120 volts AC, 60 Hz, 15 amp circuit. injury, mount fan to outlet box marked “Acceptable for Fan Support of 22.7kg. -
Page 7: How To Wire Your Ceiling Fan
(Figure 12.) fits snugly against the ceiling and the hole in the NOTE: If you are using an Emerson Light Fixture ceiling cover is clear of the downrod. Your fan is with your fan, see Light Fixture Owner’s Manual now wired to be turned on and off from the fan for wiring. -
Page 8: Using Your Ceiling Fan
“right” position, and turn fan on again. install the fan 8 - 9 feet above the floor for optimal air- 4. The fan blades will turn in the opposite direction flow. Consult your Emerson Retailer for optional and reverse the airflow. mounting accessories. -
Page 9: Troubleshooting
WARNING Emerson Electric Co. Substitution of parts or acces- sories not designated for use with this product by The use of any other control not specifically Emerson Electric Co. -
Page 10: Repair Parts
Repair Parts U.L. Model No.: CF935... -
Page 11: How To Order Repair Parts
Repair Parts Listing Model Number Description CF935ORB02 Hanger Ball Assembly, 760750-48 Consisting of: Hanger Bracket — Hanger Ball — Downrod — Parts Bag Containing: 762997-1 Wire Connector (3) — Threaded Stud (2) — Lockwasher (2) — Knurled Knob (2) — Pin, Clevis —... - Page 12 Emerson Ceiling Fan. Once we have processed your return authorization request, we will provide you with a postage paid return label which should be affixed to the Emerson Ceiling Fan package you ship to the address listed at the end of this limited warranty. The return label will be sent to the mailing address you provide to us by phone.