Emerson PRIMA SNUGGER CF905BS01 Owner's Manual page 10

5. Ceiling Fan Assembly
5.7
Mount the Flange to the Blade using Three 10-24 x
5/16" Washer Head Blade Screws per Blade (supplied)
(Figure 14).
Repeat this procedure for the other Four Blade
Assemblies.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade assemblies when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
5.8
Attach One Blade Assembly to the Motor Hub using
the Two 1/4-20 x 9/16" Captive Flange Screws with
Lockwashers, provided for each Flange (Figure 15).
Make sure the Screws are tightened securely.
Repeat this procedure for the other Four Blade
Assemblies.
NOTE: Take care not to scratch the fan housing
when installing the blade assemblies.
5.9
Engage the Switch Housing Assembly Connector with
the Fan Motor Assembly Connector (Figure 16).
NOTE: The two connectors are keyed and color-
coded and must be mated correctly (color-to color)
before they can be engaged.
Make sure the Connector Latch closes properly.
Remove and retain the Four Switch Housing Assembly
Mounting Screws from the Switch Housing Plate
(Figure 16).
(Continued)
10-24 x 5/16" WASHER HEAD
BLADE SCREW (3 per blade)
BLADES (5)
FLANGES (5)
Figure 14
Figure 15
MOTOR
CONNECTOR
SWITCH HOUSING
CONNECTOR
Figure 16
10
BLADE
ASSEMBLY
1/4-20 x 9/16" CAPTIVE
FLANGE SCREW WITH
LOCKWASHER
(2 sets per flange)
SWITCH HOUSING
MOUNTING PLATE HOLE
REMOVE SWITCH HOUSING
MOUNTING SCREWS(4)
U.L. Model No.: CF905-1