Emerson PRIMA SNUGGER CF905BS01 Owner's Manual page 7

4. How to Wire Your Ceiling Fan
4.4
Connect the Fan Motor Assembly White Wire to the
Supply White (neutral) Wire using a supplied 12 ga.
Wire Connector (Figure 5).
4.5
Securely connect the Fan Motor Assembly Black
Wire to the Supply Black (hot) Wire using 12 ga. Wire
Connector supplied (Figure 6).
Cap the Fan Motor Assembly Blue Wire with a 12 ga.
Wire Connector (supplied) if using the supplied Wall
Control (Figure 6).
NOTE: If you are using an Emerson Light Fixture
with your fan, see the Light Fixture Owner's Manual
for wiring.
4.6
After connections have been made, turn Wires upward
and carefully push the Wires into the Outlet Box, with
the White and Green Wires on one side of the Outlet
Box and the Black and Blue Wires on the other side of
the Outlet Box.
WARNING
!
To avoid risk of fire or shock, check to see that all
connections are tight, including ground, and that no
bare wire is visible at the wire connectors, except for
the ground wire. Do not operate fan until blades are in
place. Noise and fan damage could result.
SUPPLY WHITE WIRE
WIRE
CONNECTOR
FAN MOTOR
ASSEMBLY
WHITE WIRE
Figure 5
SUPPLY BLACK WIRE
WIRE
CONNECTOR
FAN MOTOR
ASSEMBLY
BLACK WIRE
WIRE
CONNECTOR
Figure 6
Figure 7
Please contact 1-800-654-3545 for further assistance
7
(Continued)
OUTLET
BOX
FAN MOTOR
ASSEMBLY
FAN MOTOR
ASSEMBLY
FAN MOTOR ASSEMBLY
BLUE WIRE
OUTLET
BOX
FAN MOTOR
ASSEMBLY
emersonfans.com
U.L. Model No.: CF905-1