Table of Contents
Advertisement
TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Figure 6-7 Installing a temperature and humidity sensor
Step 9 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
6.5 (Optional) Installing a Lamp
Procedure
Step 1 Install the lamp on the fastener on the right of the cabinet.
Step 2 Open the PDU cover.
Step 3 Connect the negative power cable for the lamp to the F5 circuit breaker (recommended) on
the PDU.
Step 4 Connect the positive power cable to the RTN+ busbar.
Issue 03 (2014-12-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
44
Advertisement
Table of Contents
