Table of Contents
Advertisement
TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Button
NOTE
Indicators
Table 3-4
Table 3-4 Indicator description
Name
Run indicator
Alarm
indicator
Issue 03 (2014-12-02)
Name
Description
Down
Turns to the next menu or sets parameter values.
When setting parameter values, you can hold down
quickly adjust values.
Back
Returns to the previous menu without saving the settings.
Confirm
The LCD screen becomes dark if no button is pressed within 30 seconds.
You need to log in again if no button is pressed within 1 minute. The preset password is 000001.
When setting parameter values, you can hold down
The LCD screen luminance increases or decreases if you hold down
simultaneously for more than 2 seconds.
The SMU is reset if you hold down
describes the indicators on the SMU06C panel.
Color
Green
Red
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enters the main menu from the standby screen.
Enters a submenu from the main menu.
Saves the menu settings.
and
simultaneously for more than 10 seconds.
Status
Description
Off
The SMU06C is faulty or has no DC input.
Blinking at
The SMU06C is running properly and
0.5 Hz
communicating with the host properly.
Blinking at 4
The SMU06C is running properly but is not
Hz
communicating with the host properly.
Off
No critical or major alarm is generated.
Steady on
A critical or major alarm is generated.
3 Components
or
to quickly adjust values.
and
to
or
and
21
Advertisement
Table of Contents
