Setting Communications Parameters (Ydn1363 Nms) - Huawei TP48120A-HD15A1 Installation Manual

TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Main
Menu
----End

10.6.3 Setting Communications Parameters (YDN1363 NMS)

Procedure
Step 1 On the LCD, check that the port mode, protocol type, baud rate and communication address
are the same as the default values in
Table 10-9 Communications parameters
Main Second-Lev
Menu el Menu
Parameters Comm.
Settings Parameters
----End
Issue 03 (2014-12-02)
Second- Third-
Level Level
Menu Menu
Table
Third-Leve Fourth-Level Menu
l Menu
Serial Port North232bound
NOTE
Set
parameters
of
North485bound
North485bo
und or
North232bo
und based
on the actual
communicati
on mode.
YDN1363 Baud Rate
Protocol
Comm. Address
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Fourth-Level Default
Menu Value
NetEco Primary 192.168.0.10
IP
NetEco Backup 192.168.0.10
IP
NetEco Port 31220
Number
10-9.
Fifth-Level Menu
Port Mode
Protocol Type
Port Mode
Protocol Type
-
-
10 Commissioning
Setting Value
Set an IP
address for the
active NetEco
server.
Set an IP
address for the
standby NetEco
server.
Set a port for the
NetEco.
Setting
Value
Manual
YDN1363
Protocol
Manual
YDN1363
Protocol
9600
3
71