Table of Contents
Advertisement
TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Figure 6-5 Installing a signal cable for the water sensor
Step 5 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
6.4 (Optional) Installing a Temperature and Humidity
Sensor
Prerequisites
You have obtained an ESD wrist strap and a pair of ESD gloves.
Procedure
Step 1 Remove the fastener for the temperature and humidity sensor from the left of the cabinet.
Step 2 Open the cover of the temperature and humidity sensor.
Issue 03 (2014-12-02)
The WATER silkscreen is on the plastic cover in the SMU06C.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
42
Advertisement
Table of Contents
