Physical And Climatic Ambient Conditions - Siemens SIMATIC ET 200R Manual

HF Radiation in Acc. w. IEC 61000-4-2
Amplitude-Modulated
80 to 1000 MHz
10 V/m
80 % AM (1 kHz)
Emission of radio interference
Interference emission of electromagnetic fields in accordance with EN 55011: Limit
value class A, group 1 (measured at distance of 10 m).
30 to 230 MHz
230 to 1000 MHz
6.3

Physical and Climatic Ambient Conditions

Transportation and storage conditions
With regard to transportation and storage conditions the ET 200R distributed I/O
device exceeds the requirements of IEC 61131, part 2. The following information
applies to modules which are transported or stored in their original packaging.
Free fall
Temperature
Temperature change
Air pressure
Relative humidity
Physical ambient conditions
The physical ambient conditions are specified in the following table with sine-
shaped oscillations. The ET 200R module is secured on the base. The test was
performed in accordance with IEC 60068-2-6
Frequency
Range
5 to 11 Hz
10 to 150 Hz
Distributed I/O Device ET 200R
(4)J31069-D0427-U001-A2-7618
Pulse-Modulated
900 MHz to 1,89 GHz
50 % ED
Frequency
Type of Condition
Displacement
15 mm
-
HF Coupling in Acc. w.
0,15 to 80 MHz
10 V
eff
80 % AM (1 kHz)
Interference Emission
40 dB (µV/m)Q
47 dB (µV/m)Q
Permissible Range
1 m
-40 °C to +70 °C
3 K/min
Not tested
Up to 95 %, no Condensation
Acceleration Cycles/Axis
- 10
5 g 10
General Technical Data
IEC 61000-4-6
unmodulated
Oktaves/
Minutes
1
1
6–3