Figure 1-2 Allocation Of The Plug Connectors And Leds On The Et 200R - Siemens SIMATIC ET 200R Manual

Product Overview
• The front of the module has 6 LEDs for indication of functions and errors of the
hardware of the ET 200R.
• Another 16 LEDs indicate the states of the digital inputs and outputs.
• Baud rates from 9.6 kBaud to 12 MBaud can be used for the ET 200R.
• PROFIBUS; galvanical isolated.
DP master for ET 200R
The ET 200R can communicate with all DP masters which behave in accordance
with standard EN 50170, volume 2 (IEC 61158), PROFIBUS. Some DP masters
can only process limited telegram lengths.
Check to determine whether your DP master is able to receive the telegrams from
the ET 200R in the their full length. A list is provided of the maximum telegram
lengths for the configuration and parameterization telegrams for the ET 200R.
See chapter 5.
Function LEDs
Actuator/
sensor
connections
X0 to X7
Status LEDs
Figure 1-2
1–4
X01
Allocation of the plug connectors and LEDs on the ET 200R
Address setting
for PROFIBUS
X02
Distributed I/O Device ET 200R
(4)J31069-D0427-U001-A2-7618