Table of Contents
Advertisement
Settings
Zoom1:
Zoom2:
Panorama:
Display if no Wide Screen Signal is Received
Most programs are broadcast together with a signal describing the format of the
picture. With this function you can set the way the picture is displayed, if no such
signal is received. This function is only available, if you have set the picture format
to auto.
1.
Press [
]. To return to the main
menu, press [
2.
Press [ ] or [ ] and select SETUP.
3.
Press [
] or [
WSS.
4.
Press [
].
5.
Press [
] or [
desired setting.
6.
Press [
] to save the settings.
The following settings are available :
Normal:
Full:
Panorama:
32
The format 16:09 is vertically spread.
Like zoom1 but the whole picture is moved upwards so that text at
the bottom of the display becomes visible.
The format 16:09 is displayed as broadcast. The format 4:3 is
horizontally spread. In this the outer areas of the picture are
modified more than the centre of the picture.
You can scroll through the settings while watching. For this, press
[
].
] several times.
] and select NO
] to select the
The format 04:03 is not adapted a black area is displayed on the
left and the right.
The format 04:03 is horizontally spread.
The format 04:03 is horizontally spread. In this the outer areas of
the picture are modified more than the centre of the picture.
LT 4010
Advertisement
Table of Contents
