Access To The Connections; Connecting To Av; Composite Video Or S-Video - Targa LT 4010 Owner's Manual And Service Information

Table of Contents

Advertisement

LT 4010

Access to the Connections

The connectors are on the rear of the unit.
The unit is equipped with different inputs to allow the best possible signal
transmission from the respective source. If your signal source (e.g. DVD-unit,
satellite receiver etc.) is equipped with a digital output, you should uses this output
so that no information is lost during transfer.
You can use several input connectors at the same time. For information on how
to select a device for display, refer to chapter: "Select source" on page 46.

Connecting to AV

Composite Video or S-Video

Use this input to transfer images of external devices such as cameras, video
games or video recorders analogue to the TV set. S-Video is also an analogue
format transmitting brightness and colour information separately. For this a cable
with Hosiden plugs is used.
1.
Plug the AV-cable according to the colours (red/white/yellow) into the socket
[VIDEO/AUDIO] and into the output sockets of the external device.
Or
Connections and Start of Operation
9

Advertisement

Table of Contents
loading

Table of Contents