Connections and Start of Operation
Connection to Roof Aerial
Ensure that the roof aerial is properly installed and grounded.
!
If the roof aerial is not grounded properly, the unit may be damaged and
can be charged with electro static charges.
1.
Plug the cable for the roof aerial into the socket [ANT].
2.
Connect the other end of the coaxial cable with the output socket of the receiver
or the antenna system.
Connecting to a Computer
You can use the television set as a monitor for the computer. This is possible
parallel to television operation. Use a 15-pin D-Sub cable or a DVI/HDMI cable to
connect the television set to the computer.
16
ANT
LT 4010
ANT
Satellite Receiver