LT 4010
Settings
Switching On
1.
Press the mains switch on the back of the unit.
This switches the unit on and it can be operated using the remote control.
2.
Press [
] on the remote control.
Switching Off
Stand-by
1.
Press [
] on the remote control.
Switch Stand by Off
1.
Press the mains switch on the back of the unit.
Now the unit is switched off completely and does not consume any power.
If it is not explicitly stated otherwise, it will be assumed that the unit
and the TV set are switched on and will be operated by the remote
control.
By default, the unit is set to the English language. For information on
how to change the on-screen language later, refer to: "Set Screen
Language" on page 31.
Please note that the unit also consumes a little power when in stand-
by mode.
Settings
21